|
The Blitz ™ |
|
The Blitz™ is HPC's second generation of the 1200CM
Code Machine, working exactly the same as the 1200CM, but with additional
features. The depth & spacing shafts have fewer threads per inch,
meaning fewer revolutions are needed to achieve full range of travel. It
also features a shoulder gauge with safety cut-off switch, and is equipped
with HPC's Softie™ deburring brush with a safety shield.
|
| Simple to use and
extremely versatile. It cuts by actual manufacturers' depths and spaces.
There is no need to convert to micrometer readings. With its rotating
cutter head, the Blitz™ can make high security angle cuts. With optional
accessories the Blitz™ can cut flat steel keys, Medeco® Biaxial®,
Schlage Primus®, as well as many other specialty keys.
|
| Cuts accurate keys by
code quickly and easily. Easily change from one manufacturer's
specifications to another. Radically different changes can be set up in 10
to 30 seconds without wasting key blanks.
|
| Uses code cards, which
are inserted in the code machine. These cards have depth and space
indicators, plus all the pertinent information such as cutter, jaw, code
series, blanks, and any special information you may need. Depth and space
adjustments are never required when changing from one manufacturer to
another. The Blitz™ Code Machine is a must for those who create master
key systems or do code work.
|
| 1200CMB Series Key
Machines now include the new 1200CMB Shoulder Gauge Switch and HPC's
Interactive Depth & Spacing Guide (HDSB-CD). |
|
| GET the CodeSource™
Code Retrieval Software (CS-CD) from
HPC when you register your machine (subject to change, check HPC 's
website for up-to-date information). |
|
| TECHNICAL INFORMATION |
| Motor.....
120VAC (1/6 hp, 3.5 amps) • Weight....... 34 lbs/15.4kg |
|
Machine Size .....12"W x 14"D x 9"H •
Bench Size.....20"W x 14"D |
| Cutters
Supplied: 1)
Tool Steel, 100° large cylinder.......#CW-14MC |
|
2) Tool Steel, 90° small cylinder........#CW-1011
|
|
Accessories Included: |
|
|
1) Softie™ Brush |
| 2)
Interactive Depth & Spacing Guide.....#HDSB-CD |
|
3) Code Cards 112 code cards/8 micrometer
cards....#DECK-120 |
|
4) Binder (for 120 cards) with Manual.....#CARD-B |
|
5) Horseshoe Tip Stop..............#CM-1054R |
|
6)
Red Tip Stop.........................#CM1054MA |
|
7)
Brass Plated Key Shim..........#KBPS-1 |
|
8)
Cutter/Adjustment Wrench....#WRENCH-1 |
|
9)
Space Adjustment Wrench....#WRENCH-2 |
| 10)
Cutter Nut Wrench.................#WRENCH-3 |
|
